Marine Fish & Coral Reef Tank FAQ’s


Getting Started

Just What Is A Reef Tank?

Basically, a reef tank is a mini ecosystem that is enclosed, and looks just like a micro tropical reef.  Each of the life forms inside correspond to one another just as they would in the wild.  It gets technical but each creature, whether fish on down to microorganisms, complete a series of cycles that accommodate each other.  Fish, shrimp, bacteria found in the food and rocks, the lighting system, oxygenation systems, the reef that aids for filtration and shelter, all correspond in an equilibrium like one would find in a real reef.

How Big A Tank Should I Purchase?

To answer this requires realizing that the bigger the container, the less impact errors will have on the ecosystem itself.  Only one mistake could upset the entire apple cart with a small tank, so it’s good to consider a larger one just to be on the safe side. You need room for the life forms, support materials like reef and coral, equipment for oxygenation, and of course for display.  The creatures need that room to move about and not get bored and not bump into one another.  The method most recommended in regard to this is the “Berlin Method”.  This process entails a protein skimming, lots of strong lighting and rock.  However, freshwater filtration and biological filtration like trickle filters and canister filters.  In addition, HOB or Hang On Back filters should not be used in the marine aquarium. The reason being is because they can clog up with materials and send dangerous nitrates back into the ecosystem which can harm the life forms in the environment.

How Much Maintenance Is Required?

Maintaining this type of aquarium calls for adapting to size and volume. Primarily, changing the water is the biggest issue.  Ignoring this can lead to disaster.  You should test your water often, and this cannot be understated.  If you’ve got a large amount of creatures in your aquarium, you’ll have to change the water more often than the recommended 4 weeks.  Two weeks is the best bet here.  At least 20% of the water every 2 weeks should do it.  In addition there is checking all equipment, making sure nothing is dirty, clogged, tangled up.  Keep the outside glass clean without debris on it, and check for any vermin that might have been curious enough to get caught in something, like ants and such.

The Kind Of Test Kits You’ll Need

Testing the water parameters of your tank regularly will be the difference between success or failure of your reef aquarium.  Below is a list of recommended test kits for the specific functions, as well as to the time schedule you’ll need to follow.  It’s adaptable, so it’s not written in stone, but a good foundation guideline to follow.

  • Alkalinity (Check 2/4 weeks)
  • Ammonia (Check during cycling)
  • Calcium (Check 2/4 weeks)
  • Magnesium (Check 2/4 weeks)
  • Nitrite (Check during cycling)
  • Nitrate (Check during cycling)
  • Phosphate (Check every 1/2 months or when algae issues occur)
  • pH (Check every 4 weeks or after a large water change)
  • Salinity(Check every 4 weeks or after a large water change)

These test kits are the standard and should be used.  Check the expiration dates of each of these.  Of additional note, some or actually the majority of phosphate kits aren’t efficient enough to detect the levels you need for a precise reading.

How Much Does A Reef Aquarium Cost?

Depending on the size of the aquarium, the equipment needed, the type of fish, and other life forms, the cost of a reef aquarium varies to a good degree.  The average run of the mill size tank is not going to be cheap.  You will find that some aquariums can range for a few hundred dollars, to thousands, to upwards of a hundred thousand dollars and more.  Some people just go all out for these aquariums, and some fish are very expensive.  Same with some coral and other creatures.  The materials the aquarium and equipment are made out of counts too. Take a look at our 55 Gallon and 75 Gallon Aquarium guides to find a reef aquarium that suits both your budget and aquatic needs.

Take into account, that you’ll be spending money up front.  Things like the cost of the tank, heating, lighting, power heads, cooling, reactors, and more.  You’ll be using artificial saltwater, or even natural seawater.  The continued maintenance costs involve test kits, replacement bulbs, additives, energy bills.  To cut costs, educating yourself is paramount.  There’s a plethora of information on the web alone.  Message board forums, Facebook pages, and even clubs that may be found locally.  You’ve got to really dig in deep here.  You’re going to be managing an entire min I ecosystem and the creatures inside.  Their lives depend on your continued attention and care.  Just like a real ecosystem, should one thing go wrong, you could collapse the entire thing.  This is why reading and asking questions is not only essential, but mandatory.  Networking with other aficionados may gain you discounts on equipment as well.  Talk to the manufacturers to look for any breaks and discounts and freebies as you can get your hands on.  Check reviews of materials and services.  Don’t leave one stone unturned and you’ll save money from the start and in the long term.

Essential aquatic knowledge

Just What Does Cycling Mean?

One of the most important duties with a reef aquarium, outside of putting water into it, is cycling.  Cycling is the bio filtration process that lets your tank mature to a level to allow for enough bacteria volume to bring about the breakdown of toxic ammonia into nitrite and then into nitrate.  You can not have a reading for ammonia higher than 0. It will take somewhere between 2-4 weeks to achieve this but you should have a 0 reading for nitrite alone, usually taking 4-6 weeks, before even putting any creatures into the tank.  It will take about 90 days for the cycling process to be complete.  The only way to hasten the process is with very high quality live rock.  Make sure to read every detail about cycling.  It is the fundamental process whereby your aquarium will be built upon.  Make a mistake at this step and you’ll be in for a world of hurt.

What Is Meant By Live Rock?

When you hear the term “live rock” in regard to an aquarium, it basically means corals that are inhabited by bacteria that are beneficial to the ecosystem of the aquarium.  These corals are Aragonite, the left over coral skeletons.  It’s  a porus rock where the anaerobic bacteria and other creatures inhabit.  The live rock serves as a source of free nitrogen gas, created by the anaerobic activity of the bacteria within.  This process performs a natural bio filtration.

What Is Meant By Base Rock?

When someone refers to “base rock”, it’s actually the same as “live rock”, made from Aragonite, but doesn’t have the bio organisms dwelling in it.  If necessary, the base rock can be converted to live rock.

What Does A Calcium Reactor Do?

A calcium reactor is a chamber that contains calcium carbonate media.  Using a bubble counter, the chamber is injected with CO2 gas, which serves to increase or decrease acidity, thus making the media to breakdown. Using a continuous calcium supplement to your coral, the carbonate is drip fed into the tank. Find out more about CO2 in your reef tank on our detailed FAQ here.

What Is A Protein Skimmer?

To remove excess waste from the aquarium, a skimmer is used.  Foam Fractionation is the term used for Protein Skimming, the two are interchangeable terms, using a device that creates very fine bubbles that express as foam and the organic impurities get attached to it.  Then the foam is removed from the device to a collection cup that is later thrown away.  This device is of utmost importance and thorough study in how it operates is recommended.  Further detail on protein skimmers is available at the reef keeping website here.

What Is A Chiller?

Just as it sounds, a chiller is a device to cool down the water of the aquarium. If yo live in an area where the room is cool enough, you r lighting may be sufficient in keeping things at the right temperature, however, if not, you need to keep the temperature low enough to keep things from heating up in your tank.  Some lighting can be too much and heat things up.  The best target for temperature should be about 77 degrees Fahrenheit, or 25 Celsius.  You should be concerned if your tank’s temperatures rise above 81 degrees or 27.5 celsius at that level of temperature, you will definitely need a chiller.

What Is Kalwasser / Limewater?

From the German language, the word, kalwasser is basically the word, limewater. This is saturated calcium hydroxide.  It has a high pH between 12-12.5.  Using top off water, it is dissolved in a slow drip feed.  This helps to maintain pH and alkalinity as well as add important inorganic calcium to the tank.  You’ll need to add 1 teaspoon of the kalwasser powder to about 1.3 gallons or 5 liters, of water, mix it up good and add slowly, 1-2 drips per second, is best done.  Use your own discretion here depending on water volume etc..

What is activated Carbon?

To purify the water, activated carbon is used.  It will eliminate that yellowy tinge or film, that is seen in an aquarium.  The water clarity is important to your aquarium in several ways, allowing light to do its job for plants and allows you to see what’s going on, as well as prevent disease.  Basically the simple route is using a filter sock and putting it in an are where the flow is slow to moderate. The carbon media is porous and thus attracts and eliminates metabolic waste.  Just use 1 cup for every 50 gallons or 190 liters of water.  Of note, use the best activated charcoal.  It will server you better in the short and long term.

What Is Reverse Osmosis?

To separate solids from water, the process of reverse osmosis or RO is done.  It is a purification procedure that has the water under pressure and forces its way through the RO membrane.  On one side of the membrane, there is a s solute where pure water passes out the opposite side.  Done correctly it will reduce impurities in the water by 95%.  It is also used in accordance with DI, aka, Dionization, to create the water of the highest purity.

What Is Deionization?

The process of water purification known as deionization, where water is slowly passed over some ion exchange resin, often, small beads, that attract ions such as copper, iron, chloride from water.  Combined with RO, the process creates highly purified water that is used to replace water from evaporation.  It doesn’t create any nutrients to the ecosystem and won’t create algae growth.  It can achieve 99% of water purity.

What are Phytoplankton?

The microscopic gloating plants like algae and diatoms are classified as phytoplankton. Phytoplankton is subject to motion and are not mobile in themselves.  You can’t see them other than by microscope.  They are eaten by zooplankton like amphipods and copeods.

What are Zooplankton?

The tiny creatures that swim about in the water column are known as zooplankton. They’re tiny invertebrates and are mostly categorized as cladocerans, rotifers, copegods.  They’re at the bottom of the food chain and eat phytoplankton.  They in turn are fed upon by fish and larger creatures.

Water Chemistry

Alkalinity

Also known as “buffering capacity”, alkalinity is the measurement of the amount of water used to neutralize acids without compromising the pH.  Due primarily to natural amounts of carbonate, bicarbone, and hydroxiide ions found in the water. The measuring of alkalinity is in kH, mEq/L, ppm.  The proper measurement should be between 7-11kH (2.5-4.Omeq/1 or 125-200ppm CaC03).  It is generally maintained by using baking soda in 1 tspn per 45 gallons by approximately 1kH), the use of a Calcium Reactor or a drip feeding Kalkwasser.

Calcium

The importance of calcium cannot be understated here.  It is an essential element of a reef tank.  The corals themselves use calcium to build their skeletal structures from the calcium carbonate that is extracted from the water. Calcium measurements come in ppm and are maintained between 380-450 ppm calcium ion (950-1125 ppm CaC0 equivalents).  The levels of the calcium should be maintains by using a Calcium Reactor and dosing is in the amount of calcium chloride dehydrate (CaC12), kalkwasser, (limewater) or other alternatives.  If you’re mixing CaC12, its solubility in the water at 20 degrees Celsius is approximately 75g per 100 ml.

Magnesium

The third most essential element that is dissolved in seawater is magnesium.  It is in an abundance about five times more than calcium.  It’s important for the biological processes of every known living organism.  It is measured in ppm and must be maintained between 1250-1350 ppm.  The levels of magnesium should be maintained by dosing magnesium chips to a Calcium Reactor or by the mandatory amount of magnesium chloride hexahydrate (MgC12) aka “magflake”.  There are other alternative names.  If you mix MgC12, its solubility in seawater at 20 degrees Celsius is approximately 170g per 100 ml of seawater.

Nitrate

NO3 aka nitrate, is an oxidized ion of the gas nitrogen, and in regard to bacteria that convert nitrate aka NO2, to nitrate, this is known as the nitrogen cycle.  To fight off detrimental buildups of algae from accumulating nitrate, it is mandatory that you maintain as low a nitrate level as possible.  The nitrate is found in measurements of ppm and the right level is between 0-5 ppm in a reef tank. If you have just fish in an aquarium, you can allow for higher levels.

Phosphate

PO4 aka phosphate is a compound of phosphorus which is a trace element that occurs naturally in seawater but at very low increments.  Usually about 0.002 ppm of phosphate is found in the seawater.  Known as an algae fertilizer, it is essential for the growth of algae that is undesirable in a reef tank.  There are several factors by which phosphate levels rise are unfiltered tap water, calcium additives, some salt mixes, activated carbon and kH buffers.  To alleviate the problem, using Kalkwasser can aid in reducing phosphate levels.  It is measured in ppm and is best to be kept at 0.03 and lower.

pH

When we talk about pH, we’re talking about a measurement regarding the acidity aka alkalinity of a solution.  PH is measured on a level of 95 which is the most acidic upwards to 14, the most alkaline with the number 7 being neutral.  That means the solution is neither alkaline nor acidic.  In regards to a reef tank, pH should be maintained at a level of 7.7 to 8.5, or better yet, between 8.1 to 8.3.  To stabilize the pH, make sureyour tank is located in a well-ventilated area, perhaps with some windows open, and the tank has enough water movement.  Reverse lighting can be used if you have a refugium.

Salinity

The measure of the amount of salt in the water is known as salinity.  It is measured in ppt, seawater has 35 ppt, and is based on the idea of what is referred to as “dry weight” of the salt content in relationship of pure water.  Using what is known as “specific gravity”, we’re able to measure the salinity as no other means other than boiling away the water and measuring what’s left will get the level and that’s not a good idea.  It calculates by measuring the relative density of the saltwater to the equivalent volume of the pure water.  Of extra note is that liquids do expand with changes in temperature so the specific gravity is then expressed at a specific measured temp.  Specific gravity should then be maintained to about 1.025 at a temperature of 77 degrees Fahrenheit aka 25 degrees Celsius.  It is of great importance that you use a refractometer to measure the specific gravity as hydrometers are not reliable.

Troubleshooting your Marine / Reef Aquarium

The water in my reef tank is evaporating, what to do?

It’s natural for the water to evaporate.  The trick to remedying the situation is of great importance.  Do not top off the water with more saltwater or seawater.  Instead, use fresh water so as not to alter the pH balance too much.  Evaporation depends mostly on the lighting you use and room temperature as well as sunlight that hits the tank.

The pH levels in my reef tank aquarium keeps dropping, what to do?

Relying mostly on CO2 and alkalinity, the pH levels of your tank can be affected by several factors.  Think of it as a balanced yet delicate biosphere.  When one thing happens to one thing, it has a direct effect on all the other things.  Mostly, the coral in your tank are still growing and building, the little busy bodies they are will use up the calcium thus reducing the alkalinity of the tank’s water.  This can be handled with simple attention to aeration.  Making sure that good ventilation in the room as well as having an overflow chamber whereby the water overflow enters a sump.  It houses the filtration equipment of the tank and the water that pours into it, is then pumped back into the tank.  This helps considerably with gas exchanges needed to keep the pH balance.  Just keep the aquarium aerated well as well as the kH, and the pH won’t be compromised.

Coral problems, how to handle them?

Trying to diagnose why the coral in your reef tank aquarium is suffering to one degree or another, depends on several factors.  Remember, you’re working with an isolated aquatic biosphere, where multiple systems are going on all the time and the imbalance of one can throw off thing for another or all.  There are, however, fundamental things that you can check on to see what might be affecting the coral.

  • The first thing to heck is the salinity. If it’s out of balance by being too high or too low, it will cause your coral to melt.  Generally this is the most regular problem for the newbie.  To handle this a refractometer is the tool of choice for testing  the water. Keep the salinity at 1.025 (+/- 0.002 is the standard ).
  • Alkalinity and calcium are the next on the checklist. Coral use these for building their structures.  There is a small range where this is optimum and should be kept with calcium at 380-450, and alkalinity at 7-11.
  • Next is the flow. In order to thrive, coral need a good flow of water movement.  They use this movement of water to flush out metabolic waste and in respiration and photosynthesis.  Since this important factor is often overlooked, it is the downfall of many a newbie aquarium owner.  Look for a minimum of 10 times the turnover in your aquarium with 20 being much better.
  • Coral placement is next. One might not believe it, but coral are some feisty creatures. They battle for dominance in the tank and will sting one another.  Their aggressive behavior might include them sending out what are known as ‘sweepers’ that can reach 6 inches in length or even longer.  With this battle format, it’s best to make sure your coral has enough room in the tank and enough room away from one another.
  • Lighting is important. You have to have adequate lighting for the process of hermatypic  Or specifically the zooxanthellae that is inside the coral so that photosynthesis is at optimum levels.  Not all coral are the same, so check each of the coral you have to see what their lighting requirements are for safe and efficient maintenance.
  • The variety of life forms in your tank need to be the kinds that are able to interact with one another and the coral. Some fish can damage coral.  They also might cause problems to mollusks too.  Make sure you do the due diligence so that you’ll be populating your reef tank with the right balance of life.
  • There is coral disease Check out the Coral Disease FAQ later for further details.

Finally, there are a number of other reasons that cause coral to become compromised in structure and vitality.  If things are out of your hands, it’s a good idea to use online forums to ask around such on as Reef Keeping.  There are plenty of experts and professionals around who will be happy to help.

The algae is bad and out of control, what to do?

As your reef tank reaches maturity it’s common for algae to go haywire and end up with unwanted algea,  it usually happens during cycling.  It will continue until the live rock is totally devoid of any detritus stored within it.  The live rock will leach and cause nitrates and phosphates that are the fuel for bad algae.  The solution here is to support the war against bad algae with the factors that produce good algae, for example Coralline, the pink calcareous algae and coral.  They’ll beat down the bad algae for the nutrients that are in your tank.  You’ll need good nutrient export, because coal and corraline don’t uptake nutrients so much.  To fight this, use phosphate removers and change the water regularly. The best solution is using a top notch protein skimmer.  Don’t overfeed, or overstock your tank, and do not use tap water to top off your tank after evaporation.  Use the right lighting to best optimize coral growth and not promote bad algae growth.

Don’t panic if you see green hair algae aka bryopsis, cyanobactira, and diatoms before the tank reaches maturity and equilibrium It does take time so patience is a virtue here. Just be professional and consistent with your maintenance.  In addition, activated charcoal can help fight off hair algae.

The coral growth in my reef aquarium is poor, why?

The culprit here is low calcium levels, pH being compromised, and alkalinity.  As mentioned earlier, there is a balance of these factors that must be maintained or one will compromise one or more other factors thus leading to problems like low coral growth.  Do what you can to maintain the proper stable parameters.  Try dosing the tank with small amounts on a more regular basis instead of large amounts.  Phosphate is also a corporate in the cause of slow coral growth and can contribute to bad algae.

What is the cause of the gold and brown colored stuff on my rocks and glass?

Enter, the diatoms.  When diatoms gain ground after the tank has finished cycling or when new animals or rock are added to the tank, diatoms might arise.  They feed of nutrients so it’s best to do what’s possible to minimize nitrates, DOC’s, and phosphates. Silicate is a major reason for diatom growth and it comes from tap water.  Use filtered water instead to top off your tank.

What is the red slime like coating that is on my substrate and rocks?

Cyanobacteria is the probable culprit here, aka Red Slime Algae.  If the slime has bubbles in it, it’s a clear indication of cyano.  Cyano feed off nitrates, phosphates, and DOCs.  Try reducing these factors and make sure the tank has sufficient ventilation. CO2 is another source of food for the Red Slime.  Proper lighting helps to fight this too.

Coral Disease

Bleaching, what does that mean in regard to coral?

When coral turns white from the tips downward, it means excessive lighting is at the root of the problem.  The coral is white but it’s still alive.  Try dimming the lighting and let the coral repair itself.

Just what is STN/RTN?

The definition for STN/RTN is Slow/Rapid Tissue Necrosis.  The prefix defines just how quickly the process of necrosis occurs.  STN/RTN occurs when coral starts to bleach from the base of the coral upwards.  STN is generally caused by the intro of a new colony that suffers from stress.  The coral that is stressed produces chemicals that produces extreme reactions in the other coral.  It’s time to get rid of the bad coral colonies to a tank where you can quarantine them.  Changing the water and carbon will assist in the removal of chemical messengers from the water.  RTN is generally caused by a sudden and abundant change in the parameters of the water.  It is advisable to double check before adding any additives.

Acronyms

The field of reef tank aquariums is so specialized it has its own nomenclature, thus a series of acronyms that are part and parcel to everything.  Below is a list of acronyms that should assist you in understanding the hobby and industry.

  • ASW = Artificial Salt Water
  • BB = Barebottom (no substrate)
  • BR = Base Rock
  • BS = Baking Soda (sodium bicarbonate)
  • CC = Crushed Coral
  • CL = Closed Loop
  • CUC = Cleanup Crew
  • DI = Deionization
  • DOC = Dissolved Organic Carbon
  • DSB = Deep Sand Bed
  • EC = End Cap (light)
  • FO = Fish Only
  • FOWLR = Fish Only With Live Rock
  • FFS = Favourite Fish Store
  • FTS = Full Tank Shot (photography)
  • HO = High Output (light)
  • HOB = Hang On Back
  • HOT = Hang On Tank
  • LFS = Local Fish Store
  • LNS = Low Nutrient System
  • LPS = Large Polyp Stony (coral)
  • LR = Live Rock
  • LS = Live Sand
  • MH = Metal Halide
  • NSW = Natural Salt Water
  • NO = Normal Output (light)
  • ORP = Oxygen Reduction Potential
  • PAR = Photosynthetically Active Radiation
  • PC = Power Compact (light)
  • PH = Powerhead
  • RSM = Red Sea Max (aquarium)
  • QT = Quarantine Tank
  • REDOX = Reduction / Oxidation
  • RO = Reverse Osmosis
  • RODI = Reverse Osmosis / Deionization
  • RTN = Rapid Tissue Necrosis (coral)
  • SB = Sandbed
  • SG = Specific Gravity
  • SPS = Small Polyp Stony (coral)
  • SSB = Shallow Sand Bed
  • STN = Slow Tissue Necrosis (coral)
  • TDS = Total Dissolved Solids
  • ULN = Ultra Low Nutrients
  • ULNS = Ultra Low Nutrient System
  • UV = Ultra Violet (light)
  • VHO = Very High Output (light)
  • WH = Wiring Harness (light)
  • WC = Water Change

Chemical Acronyms

  • AC = Activated Carbon
  • KH = Akalinity
  • CA = Calcium
  • GAC = Granular Activated Carbon
  • MG = Magnesium
  • PH = Acidity/Alkalinity measurement
  • PO4 = Phosphate
  • NH3 = Ammonia
  • NO2 = Nitrite
  • NO3 = Nitrate
  • Livestock Acronyms
  • BS = Brittlestar
  • BTA = Bubgle Tip Anemone
  • CB = Coral Beauty
  • CBB = Copper Band Butterfly
  • CBS = Coral Banded Shrimp
  • GBTA = Green Bubble Tip Anemone
  • GSP = Green Star Polyps
  • LMB = Lawn Mower Blenny
  • LTA = Long Tentacle Anemone
  • PBT = Powder Blue Tang
  • RBTA = Rose Bulb Tip Anemone

I hope you find the information and advice MyAquarium has given you useful, if you are looking to buy a 75 Gallon or a 55 Gallon reef tank, please take a look through our guides. Failing that if you would like further advice on setting up an aquarium, choosing an acrylic or a glass aquarium or even just want more information on your fish tank’s manufacturer delve a little further in to the MyAquarium guides to find out more.


SeaClear 40 Gallon Aquarium Review & Spec


This Sea Clear 40 Gallon Acrylic Aquarium stands at 36” wide, 15” long and 16” high, available in two colors; suites reef, marine, salt and fresh water aquatics. Sea Clear Tanks are renowned for quality, selling some of the best aquariums on the market, to back this up a limited life time guarantee is included against leakage and provided with an aquarium lid with a 24” UL fluorescent lighting hood (compatible T8 or T12 fluorescent tubes).

SeaClear 40 Gal Acrylic Aquarium Statistics

Capacity40 Gallons
Dimensions36" Wide x 15" Long x 16" High
Type of HabitatAquatic
ShapeRectangle
MaterialAcrylic
WarrantyLifetime Limited
What's included?Aquarium Hood, Fluorescent lighting (ex tubes)
Price$$ - Good value for an acrylic aquarium
SupplierAvailable to click & collect from PetSmart

Acrylic aquariums are ideal for warm marine aquatics as the thermal retention is far better than that of Glass similarly, as per our Glass vs Acrylic discussion, users can quite easily drill to fit heating and filtration customizing without the risks of cracking / breaking glass. Most people believe acrylic tends to discolor with the material having progressed it no longer clouds, instead most users report the clarity of the Sea Clear 40 tank to better than glass as it tends not to distort. SeaClear molecular bond and heat polish their edges together to retain strength and prevent any possible fractures, cracks or breaks at the seams.

SeaClear-40-Gal-Aquarium

One word of warning with an Acrylic aquarium use a plastic algae scraper, rather than a metal one, to prevent scratching the acrylic and attempt to keep coral away from the acrylic. Blemishes can easily be buffed out although will require some elbow grease.

This SeaClear 40 Gallon Aquarium is good value for money when compared to other acrylic aquariums albeit a more expensive than its glass counter-parts. A good quality hood is provided although with the introduction of LED lighting, and the ability to change the color temperature, many experienced aquatic hobbyists have chosen to upgrade it. Backed by a quality brand name and reassured by a life time guarantee, if you are looking for a medium sized aquarium this SeaClear acrylic tank ticks most of the boxes. Check availability at Amazon.


Substrate in your Planted or Reef Aquarium


  1. What is substrate? If I have gravel in my aquarium, do I need special substrate?

Substrate is everything that rests at the bottom of your aquarium, whether it is gravel, sand, marbles, or anything else you may put down there.

  1. What is “Clown Puke”?

Clown puke is the bright multi-colored coated gravel that many people use to coat their tanks. Using clown puke is completely optional; while some people find it tacky, others absolutely adore it. Personally, we at MyAquarium aren’t too fond of this particular substrate because it just looks tacky.

  1. Do I need some special type of substrate to grow plants in my aquarium?

There is no special substrate required to grow plants in an aquarium. Putting in regular uncoated inert gravel between 1-3 mm in size in your aquarium will work perfectly. At MyAquarium, we recommend that those who are starting out use only a thin layer of ground peat moss, which comes in compresses bales at hardware and garden stores, as a base layer. Keep in mind that you should still be able to see the glass of the aquarium. One ounce of laterite per gallon of water is definitely a good idea, and you will be able to get some mulm, which is the stuff you vacuum out of the travel, from an established tank. You can put some of that underneath the gravel in your tank and your plants will grow to be very strong and healthy looking. Be cautious when it comes to using certain gravel and sands, as some of them contain minerals that can have a negative impact on the water chemistry of your aquarium.

  1. Can I not fertilize my plants if I use a fancy substrate?

While it is true that certain specialty substrates contain high levels of minerals, they do not have enough macro nutrients. Even if you have a special substrate in your aquarium, you will still have to feed your plants regularly.

  1. What is the best substrate?

The best substrate is whatever fits within your budget and looks good to you. I personally use SeachemFluorite, which is a combination of Fluorite and fine gravel, CaribSea Eco-Complete, Seachem Onyx Sand, and regular gravel in all of my planted tanks. This setup works well for me. ADA Aqua Soil is one of the newer substrates and it is gaining in popularity. There are a number of other substrates that others like to use, including Profile, Turface, and Soilmaster Select. I highly recommended that you do not use dirt, potting soil, or kitty litter at all if this is your first planted tank. While some people have had success using these substrates, most people’s planted tanks don’t do well with them.

  1. How much substrate do I need?

Most people with planted tanks use 2-4” of substrate. Click here if you want to know how many bags you should use for more common types of substrates.

  1. Can I use sand?

Whether or not you should use sand as a substrate will depend on a number of factors, including which type of sand you want to use. There are some people who use reef or marine sand because they like the white color, but it can lead to two big problems. One problem is that these types of sand can have a negative impact on the water chemistry in the tank. The other problem is that white sand may look good, but not so much once fish and plants are introduced to the tank. The white sand then begins to show everything that lands on it from the fish and no longer looks quite so nice. If you are trying to decide whether or not to use a certain substrate, try pouring a bit of muratic acid over it. If the material starts to bubble, smoke, or fizz, do not use it.

  1. Do I need a substrate heater?

No, you do not. This is the last piece of equipment that you should purchase for your tank, and only if you have a lot of extra money to spend. A lot of people end up regretting putting a substrate heater in their tank because of how plant roots tend to get tangled in them. If you want to save some money and avoid future headaches, don’t get one of these heaters.


Clear-for-Life 40 Gallon Uniquarium Tank Review & Spec


Manufactured by Clear-for-Life Aquariums this 40 Gallon Acrylic Uniquarium joins their vast collection of premium tanks with a built in filtration system making ideal for Freshwater, Marine, Reef and Planted setups. As per our other reviews of the Clear-for-life tanks here at MyAquarium this 40 gal tank share the same quality build as others in the range being molded seamless and backed by their limited life time guarantee.

Clear-For-Life 40 Gallon Rectangle UniQuarium Statistics

Capacity40 Gallons
Dimensions36" Wide x 15" Length x 16" High
Type of HabitatAquatic
ShapeRectangle
MaterialAcrylic
WarrantyLifetime Limited
What's included?Pre-drilled tank
Price$$$$ - Premium Quality tank, Reef and Plant Ready.
SupplierPetSmart. Click here to check availability.

In comparison to glass this acrylic tank is comparably 40% brighter in appearance and not needing supports, rails or silicone provides much better viewing than its 40 gallon glass counter parts. Being a Uniquarium it features a unique 3-in-1 filtration system combining mechanical, chemical and biological into one section allowing you to just setup, cycle, check nitrate and ph levels before introducing your choice of aquatics. Further move being acrylic modifications to the tank can easily be made without risking fracturing or damaging the remainder of the tank, note this will void the guarantee.

Clear-For-Life 40 Gal Uniquarium Filtration System

The aquarium doesn’t include lighting or a hood although you can easily add standard sized LED lighting to suit. Being a molded acrylic tank, standing at 36” Long x 15” Wide x 16”, rather than having seamed pieces of glass algae can grow around the edges thus require a little hands on cleaning rather than just using an external magnetic cleaner (not ideal for acrylic either as particles can trap and scrape the material). Many users of the Uniquarium filtration system swap out the bioballs over time with live rubble rock due to over nitration.

This Clear-for-Life Uniquarium is a solid investment for any aquatic fanatic, whether you are getting started and want an all in one tank, looking for a feature piece for your home or a looking to build out a planted / reef aquarium. Two colors are currently available to purchase, Blue and Sapphire Blue, check availability here.

Clear For Life Acrylic 40 Gallon Tank


Deep Blue Professional 90-Gallon Reef Ready Tank – Review & Spec


The Deep Blue Professional ADB18090 90 gallon reef ready tank is large enough to accommodate your favorite species of large fish as well as having multiple fish. This product is manufactured by one of the largest names in the industry, Deep Blue Professional and it is made in the United States.

Capacity90 Gallons
Dimensions48" Length x 18" Width x 24" Width
Type of HabitatAquatic
ShapeRectangle
MaterialGlass
WarrantyLimited
What's included?Compact corner overflow pre-filter, pre-drilled drain & return holes, complete plumbing kits, and patented Floodgate technology.
Price$$$ - Good quality tank.

Now your fish can swim in style with the 90 gallon reef ready tank from Deep Blue. You can have a living room centerpiece to be proud of when you set up this huge tank and populate it with your favorite species. It features just what you need to start your own reef tank and raise a population of marine fish that anyone would be proud of.

Deep Blue Reef Ready 90 Gallon Tank

There are a number of advantages to having a reef ready tank like this. There is a reduction in head loss on your return pump when you use a reef ready tank because the holes are already built-in. Besides, an overflow box saves space and looks much better and another advantage to having it already built in is that it decreases your chance of flooding. For serious fish owners who want to have fish with as little hassle as possible a reef ready tank is the perfect choice and you can count on Deep Blue Professional to make a quality product at a fair price.